Dawn Apart Camera, Orders & Construction Tips
See inside the factory, level the pad, and stop fighting the build UI.
Most “the AI is broken” moments in Dawn Apart are camera or order problems. Roofs hide Power Outlets, uneven voxels disable spaceports, and low-priority cut jobs sit forever while you spam new blueprints. This page documents the controls and construction habits that keep Sirius B3 readable. Pair it with Getting Started and the Tools hub.
Camera and view modes
Dawn Apart is a multi-floor voxel colony. Memorize the function keys early (labels can vary slightly by patch, but community and launch footage consistently teach):
- F1 — default / standard view.
- F2 — roofs off (roofless). Essential for placing beds, outlets, lights, and indoor machines without guessing.
- F3 — level / slice view for working a single floor height.
- F4 — foundation / height tooling flavor (raise/lower walls, hide objects above a height) depending on build.
Move with WASD, orbit/tilt with the modern free camera (post-0.87 orbit cam updates allow vertical tilt), and zoom until belts and cable links are obvious. After Final Frontier, poles show cables — if you cannot see them, you are probably inside a roof.
Interior checklist with F2
- Toggle roofs off before furnishing a dorm.
- Confirm Power Outlets sit on interior walls in pole range.
- Verify doors actually punch through the voxel wall.
- Toggle roofs back on to confirm temperature enclosure still reads as a room.
Selection, drafts, and orders
- Left-click select colonists or buildings; right-click for context actions (haul to, allow/forbid, Turn to Soylent on bodies, etc.).
- Draft / enlist fighters from pioneer UI when raids hit — gun icons confirm who is armed (defense raids).
- Use Gather for Organic Matter bushes after Final Frontier food changes.
- Use Level terrain orders for pads and firing lanes.
- Use cut/mine priorities when nobody walks to an obvious job — raise priority before deleting the blueprint.
Spaceport leveling (critical)
Ships need a perfectly level 3×3 landing zone. If the pad is crooked, the port disables and trades fail. Workflow:
- Place or select the spaceport blueprint.
- Issue a Level order on the pad footprint.
- If idle, bump mining/terraforming priority.
- Only then haul Lucrum or contract goods to the port.
Details and quota pressure: mining Lucrum.
Construction tips that save hours
Build in slices
Work one F3 level at a time. Finish flooring and wall outlines before furniture so haulers are not clipping through half roofs — a common Violent Frontier / integrity complaint when stairs and ceilings disagree.
Support and integrity
Non-mounted blueprints need ground or support. Floating wishful machines will refuse to place. Raid damage and C4 create holes; repair before assuming climate failure (Violent Frontier).
Stockpile hygiene
Right-click stockpiles to allow/forbid categories. Keep Lucrum export piles clean so haul-to-spaceport orders do not drag granite across the pad. Forbidden item bugs after drafts happen — if someone drops gear marked forbidden, re-allow or reclaim deliberately.
Power-aware placing
After Final Frontier, ask “is this room outlet-powered?” before spamming Electric Furnaces, Soylent Makers, heaters, or turrets. The missing-power icon is a control-surface clue, not flavor art. Network graph lives in the Power UI — open it when brownouts hit mid-raid.
C4 as a precision tool
Trade Boom C4 charges come in sizes with depth control. Use them to notch belt trenches or flatten stubborn ridges, not to delete your palisade. Terraforming still needs a follow-up Level pass for pad work.
Suggested keybind practice loop
Spend five paused minutes on a fresh save:
- F2 through the Magpie and starter rooms.
- F3 up one planned factory floor and down again.
- Place a ghost wall, cancel it, place it correctly.
- Level a flat 3×3 and confirm the tool feedback.
- Select two colonists, draft, undesignate, watch UI icons.
- Open trade / spaceport panels once so haul targeting feels familiar.
Then unpause and follow the early builds tier list without fighting the lens.
Common control mistakes
- Decorating indoors while roofs hide collisions.
- Accepting trades before the pad Level job finishes.
- Leaving Gather unset, then wondering why Soylent Maker idles.
- Drafting from the wrong camera height and losing fighters in stairwells.
- Ignoring priority sliders and assuming pathing is hard-broken.
- Building electric machines on the far side of the map with no pole chain.
Related pages
- Tools hub
- System requirements when FPS dies
- Automation factory once belts outgrow hand clicks
- Power & food grid for outlet placement
- Players / loyalty so schedules match the shifts you micro
Good controls will not print Lucrum alone — but bad controls will hide every system the rest of this wiki describes.
Frequently Asked Questions
Quick answers for Sirius B3 prospectors.
What does F2 do in Dawn Apart?
It toggles roofs off so you can see and edit interiors — beds, outlets, lights, and machines — without the ceiling in the way.
What does F3 do?
It engages a level/slice view so you can work one floor height at a time in multi-story factories.
Why is my spaceport disabled?
The landing zone is probably not a perfectly level 3×3. Issue a Level order and raise priority if colonists ignore it.
Colonists ignore my cut or mine order — bug?
Often priority or access. Raise the job priority, check pathing with roofs off, and confirm the voxel target is reachable.
How do I feed Mr. Soylent after 1.0?
Gather Organic Matter into a powered Soylent Maker, then stock Mr. Soylent. Controls-wise, remember to actually place the Gather order on bushes.